DGR COILOVER / SUSPENSIONS IS HIGHLY RECOMMENDED BY 999AUTOMOTIVE. FOR YOUR PERFORMANCE AND COMFORT DRIVING EXPERIENCE!!!!!!!!!!!!!!!!!!!!!
NEW DGR COMFORT RIDE PRO COILOVER KIT. NEW DESIGN (STREET MODEL / TRACK MODEL). BEST COILOVER SUSPENSION FOR STREET ALSO TRACK USE!
100% MADE IN TAIWAN THE SAME FACTORY AS SOME JAPANESE BRANDS! 999AUTOMOTIVE IS NOT a "ONLINE ONLY" COMPANY. WE HAVE SHOWROOM/WORKSHOP IN SYDNEY + BRISBANE AUSTRALIA.WE CAN ALWAYS HELP OUR CUSTOMER FOR INSTALLATION OR ALL THE SUPPORT! DGR COILOVERS - HIGH QUALITY / SPORTS RACING DAMPER KIT. DGR High Performance Suspension KIT. Features and specs of the coilover set. 30 levels of damping adjustment. Full threaded absorber tube casing for independent height adjustment. SAE9254 high strength durable cold wound steel & heat treated coils. Genuine Japanese KOYO spherical bearing. Italian IP high quality damper oil.
Lock rings are made of high quality cast iron and the lower bracket is made from light weight aluminium material. Elongated camber bolt hole for camber adjustment without the need of special camber screw and bolt.Based in Taiwan and grounded with in-house CNC mechineries and warehousing equipments, the process from assembly line to fulfilment service are swift and coordinated. The Research and Development team trial run and tested suspersion systems and parts for years to be able to systematically analyze and set up optimal applications over wide-ranging road conditions. The developed a series of suspersion systems with excellent performance and ride comfort, as well as diversified shock absorbers for various makes and models. To assure product excellence, ultimate driving performance and unsurpassable durability, DGR delved deep into various tests, planning and manufacturing stage before wordwide distribution.
The shock absorbers enable drivers to achieve amazing and vastly enhanced driving pleasure without compromising safety. We believe thet the damping quality and the level of control DGR coilover delievers exceede that of any comparable product within its range, and it is tagged with competitive price for all makes and models.DGR Coilover is intended to strike a balance between performance and cost effectiveness. DGR Coilovers are available in street and Race/Track categories, cater for different type of users on road. Features a lighter damping and lower spring rate to facilitate a smoother ride, and offers the benefit of stability in negotiating corners and bends, It correlates both driveability and comfortability factors to suit for daily driver. Below are the features and specs of the coilover set. IP High quality fork oil.
Lock rings are made of high rigiity cast iron and lower bracket are made of light weight aluminum material. Camber adjustable aluminum pillow ball upper mount (optional on most McPherson applications only). DGR utilises a very well respected and proven monotube damper design combined with high quality components which has gone through numerous rigorous tests and costly manufacturing processes. This design has gained worldwide recognition for its unparalleled performance and it is being used as OEM hsock application in some high end performance. Mountube uses a single outer tube and the oil and gas are separated by a free piston, which puts the oil on the top and gas on the bottom.
The damper uses a large floating piston which displaces more oil, creating more flow through the valves than the smaller twin-tube piston, this make the damper much more sensitive to small suspension movements. The high flow in turn make it more repeatable and enables to achieve an accurate control of the daming force. Mono0-tube design also allows the heat in the oil to transfer directly to the outer surface of the shock body, which is in irect contact with cooling airflow where it can dissipate more efficiently.This reduces heat-induced fad, allowing the shock to maintain full damping characteristics as temperature rises. 30 levels fully adjustable damper. DGR shock absorbers offer excellent, versatile performance , durability and ride comfort over all road conditions. Featuring 30 levels of damping adjustment, it combines both rebound and compression in one adjust for simplicity and ease of use.
The damper can be easily assedssed and adjusted via a knob at the top of the amper mount. Simple adjustments can be made to tune to your desired style of driving and comfort level that you desire.
This allows you to preset to soft damping for your daily drive and switch to hard damping for track days. Two way independent height adjustment.
DGR damper uses a threaded tube body coupled with an adjustable lower mount, offering an independent height adjustment. This means a wide range of height adjustment is available without affecting the spring per-load or the damper stroke length. This allows significant ride height changes without sacrificing shock travel or ride comfort. So whatever height is being set, you will received to optimum performance of the damper.You can raise your car up to factory height for OEM appearance. Otherwise, you can drop your car all the way down for a formal racetrack aggressive outlook which also lowers your centre of gravity. The availability of spare parts is critical and imperative to ongoing operation. In addition, all functioning parts are serviceable, However, such service is generally not recommended as the cost incurred did not exceed the technical benefit gained form it.
If cost effectiveness is well evaluated, replacing a brand new part will be a more efficient and economical option. The spring rate and damping force of DGR shock absorbers will not be the same as the original factory specifications of vehicle. When using DGR shock absorbers, please follow the local laws and regulations regarding shock absorber modification. Shock absorbers are filled with highle compressed nitrogen.Do not disassemble shock absorbers. DGR is not responsible for any probuct failure or accident resulting from dissembling. DGR shock absorbers are divided into two categories, sport, and racing. The springs included with DGR shock absorbers are made from high qualitty SAE9254 steel, which is extremely resistant to deformation and provides excellent rigidity and long life usage. Unlike original factory fixed shock absorbers, drivers can adjust the damping coefficient. The cylinder oil used in DGR shock absorbers in higher quality than that of factory standard oil. When encountering pits or pot-holes on the road DGR shock absorbers will reduce shock and prevent the second bounce feeling due to excellent bounce suppression qualities. The original damping level of the shock absorbers will be set at 30 by the factory. Rotate knob clockwise toward H for a harder ride. Rotate knob anti clockwise toward S for a softer ride. Shock absorbers are set to the softest damping coefficient at the factory, to adjust to desired damping level follow step 2 and 3. Adjust the damping level of the left and right hand-side dampers by the same factor. Adjustment of ride height safety information. Silo body and legs must not contact any of the vehicles pipes, tubes, or hoses as this may cause them to rupture. Sock absorbers must be installed in accordance with the following instructions. DGR is not responsible for any mishaps resulting from improper installation. For type A suspension dampers, the distance between the lower ring and the start of the tube threading should be on less than 25mm. For McPherson type suspersion dampers, the distance between the lower ring and the end of the shock absorber tube should be on less than 60mm. This is the maximum adjustment rage. Height adjustment(shock absorbers and springs separated). Release rings 1 and 2. To increase the ride height, increase the height level of B and D. To decrease the ride height, decrease the height level of B and D. Do not adjust the distance of B or D independently, the distance of B and D must be adjusted simultaneously. Lower vehicle and check the distance between E and F, the distance between these points should be 4-5 cm. Once adjustment is complete be sure to lock rings 1 and 2.
Loosen screw A to adjust the angle of elevation. Measure the distance of Bshown in the diagram.
Using the DGR supplied tool to loosen the ring shown as C in the diagram. Rotate the ring anti-clockwise to adjust the ride height, after each adjustment of 1.5mm ring C must be locked before further spring compression. The ride height can not be adjusted by altering the position of ring D.
When installing or adjusting the fish eyes, ensure the points of A and B shown on the figure are perpendicular with the vehicle body. Once installed to the vehicle, release the four screws, adjust the camber angle appropriately, the lock. Triple Nine Automotive (999Automotive) was established in 2003 with the goal of providing customers a one stop place for all their vehicle needs.With more than 2000 performance products in our warehouse. We are proud to say that we will be able to cater to your requirements. At the workshop, our mechanics are trained from standard mechanical repairs to performance modifications. Including suspension upgrades and a skilled in-house fabricator for your custom requirements. Equipped with a 4WD dynamometer from Dyno Dynamics, 999 Automotive provides aftermarket ECU tuning along with our customers being able to find out how much power their car produces in ShootOut mode. Our aim is to make our customers' cars reliable, we want our customers to enjoy the fun of the modifications we perform to their cars. Therefore, the power figure is not the only thing we are concern about. We care for all the modifications that make your car run smooth. In addition, we offer car enthusiasts our technical experience and expertise as well as the ability to diagnose and rectify any mechanical problems of your car to perform better or run more cost efficient. Our showroom displays a wide range of products for both interior and exterior upgrades from appearance to performance.
This can be paid in Australia Dollar. We will arrange the product for you and inform you when they are ready. Please ensure that you read and acknowledge the following terms and conditions prior to placing your order with TRIPLE NINE AUTOMOTIVE.
All prices and descriptions are subject to change without notice. TRIPLE NINE AUTOMOTIVE shall have the right to refuse or cancel any order placed for product listed at the incorrect price.
All products on this website are intended for race or off-road use only. It is the owner's responsibility to be aware of the legalities of fitting these products in his or her state/territory regarding noise. TRIPLE NINE AUTOMOTIVE will not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labour. TRIPLE NINE AUTOMOTIVE will not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part.
TRIPLE NINE AUTOMOTIVE shall not be held accountable for any misconception or disappointment associated with any product. All goods remain the property of TRIPLE NINE AUTOMOTIVE until paid in full. It is the customer responsibility to contact TRIPLE NINE AUTOMOTIVE within this time period to be eligible for a return.
It is the responsibility of the customer to verify the correct part before ordering and installing a particular part. All foreign orders are final.The item "DGR Full Adjustable Coilover KIT COMFORT RIDE PRO FIT NISSAN 280 ZX 7883" is in sale since Saturday, June 4, 2016. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts\Other". The seller is "999racing" and is located in Taichung City. This item can be shipped worldwide.