Godspeed Project's MonoSS is our one entity in our family of single-adjustable coilover suspension kits. These coilovers are designed to be a streetable race built coilover at an affordable price.
It features a monotube damper that is made out of a carbon seamless steel 52mm tube with a performance internal piston providing maximum damper response. The cold-bent springs are made from high strength SAE9252 steel to optimize the balance between performance and comfort.
Using race quality shock oil, Godspeed Project can guarantee exceptional damper performance at any temperature on and off the track. The top of the shock is attached to the car using a high quality top hat that features a high performance Japanese KOYO 6204Z bearing pillow ball mount (when applicable). The bottom shock brackets are made out of a T7075 forged aluminum or carbon steel brackets for lighter weight without sacrificing durability which also includes brake line brackets (when applicable). The MonoSS offers 16 level of damper adjustability which can be set to your preference.
Front camber plates with pillowball mount for camber adjustment. 16 precise levels of damper adjustment. Lightweight aluminum lower mount and T7075 forged aluminum / carbon steel brackets.
52mm carbon steel shock body with a performance internal piston. Independent ride height and spring preload adjustments.
Race shock oil with a high viscosity index. Prior to installation, verify all hardware and properly preload suspension to 10mm. Our technical department is available to answer any other questions. Godspeed MonoSS Coilover Lowering Kit Key Features.Full Length Adjustable Suspension Kit With Mono-Tube Shock Design. 16-Clicks damping force adjustment mechanism, enabling a wide range of damping force adjustement. Aluminum hardware are used where is applicable to provide tensile strength and light weight. Large diameter piston helps improve quicker response in damping action. Replaceable And Rebuilt-able Shock Cartridge if worn out. What's Full-Length Coilover System? Mono-tube shocks with threaded body enable ride height adjustment by extend or shorten the length of full strut. Traditional coilovers that play with spring preload to raise or lower vehicle ride height can cause noise or poor riding quality. Full length type coilovers enables spring preload to be adjustable independently from ride height adjust-ability.
MonoSS coilovers allows the entire length of strut to be adjusted independently without change the spring stroke amount and not worrying about shock bottoming out due to shrink springs. Provided illustration on the right should helps you understand how these full-length coilover struts functions. By adjusting the lower mount up or down (B), you can extend or shorten the full length of full strut (A). Improved original spring with high tensile SAE9245 steel performance springs. Customized spring rate can be easily replace with another.
Aluminum forged upper mount provides high rigidity and light weight. Camber adjustable pillow ball available where applicable.
Improves steering feel and control. Large diameter shock cylinder case with anti-corrosion coating.
Forged aluminum spring seat, lock ring achieve high strength, durability and lightweight. With 16 clicks rebound force adjustment, you can tune the dampers to be more comfortable or more sporty ride. PLEASE NOTE: Some application are still dependent on other information such as Front Wheel Drive, Rear Wheel Drive, All Wheel Drive, or etc.. To reavel Important Part Details in the Compatibility Chart be sure to put your mouse over the IMPORT PART DETAILS BOX. MOBILE VIEW MIGHT NOT SHOW THE COMPATIBILITY CHART.
Every package is insured for damages or lost, please report any problems within 24 hrs after package has been delivered. Thanks for shopping with Us. You have 30 calendar days to return an item from the date you received it.To be eligible for a return, your item must be in original condition that you received it. Your item must be in the original or better packaging.
Products must be in "Like New" condition and free from damage of any type, including, but not limited to dents, scratches, cracks, abuse, defacement or indication of removed screws/fasteners or seals. In the event that the product you are returning does NOT meet the requirements described in this listing, we will. Photograph the merchandise and packaging, and prepare a detailed summary of our determination as to why the return was denied.We are happy to disposed the unwanted product for you free of charge. If replacement part(s) is available then only damaged/defected parts are replaced, We will not replace the whole kit/system. These products are made without any auto maker's support and approval to perform upgrades to the vehicle. The item "MonoSS Coilover Lowering Kit ADJUSTABLE Damping For MAZDA PROTEGE5 01-03" is in sale since Tuesday, June 7, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts". The seller is "project_gs" and is located in South El Monte, California. This item can be shipped worldwide.