24 Ways Damping Adjustable Coilover Struts Kit For SUZUKI Swift G10 1985-2001

  
Claims: No any proprietary rights, affiliate and sponsorship with the third party marks. Front top mount: Pillow ball top mounts Damping: 24 levels rebound damping adjustable Spring rate: Front : 8kg/mm (448 lbs/in) Rear : 5kg/mm (280 lbs/in)? Adjustable height: Yes lowering 1" to 3" Shock type: Twin tube Spring Preload: 7-10 mm Color: Red body with black spring. Complete coilovers assembly 2 front and 2 rear A pair wrench for height adjustment.

Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance 2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Pillow ball top mount - It improves the steering feel and response. Twin-Tube structure allows sufficient stroke within the shock absorber.

Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle.

High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.

Most pieces in our coilover systems, including mounts, collars and spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable and rust resistant components. Steel shock bodies with special surface treatment to improve the durability. Instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Other items you might also like.

Forged Steel Con Rod for Suzuki GSXR1300 Hayabusa 08- piston Connecting Rod rods. Connecting Rods for Suzuki GSX-R1100W 93-98 GSF1200 Bandit Conrod Bielle 117mm. Racing Forged 4340 Connecting Rods Set For Suzuki Swift Gti 1300 G13b Conrods. Thumb Throttle Assembly for Suzuki LTR450 LTR450Z 2x4 22mm CNC Aluminum Billet.

Carb Carburetor Assy For Suzuki LT230GE LTF230 Quadrunner 230 Carb 1985-87. CYLINDER PISTON KIT W/GASKET FOR SUZUKI LT50 LT 50 RINGS. TIMING CHAIN KIT For SUZUKI CHEVY 96-09 1.8L 2.0L 2.3L G18K J18A 12761-77E10 NEW. Magneto Alternator Stator Coil 2006 - 2015 for Suzuki GSXR 600 GSX-R 750.

Pair For Suzuki Samurai Free Wheel Hubs Manual Locking Hubs 2PCS 6-stud Front. Will this fit my car? Please make sure you have read through the whole listing and paid attention to "note" and "notice". When will my order be dispatched? Can I pick it up at the warehouse?

Can I amend my order? What do I do if I have not received my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. Research Department of maXpeedingrods has been dedicated to the academic research of tuning car performance, and it has invested huge amount of manpower and material resources in continuously improving the car performance indexes.

MaXpeedingrods has modern laboratory, production factory, testing equipment and advanced techniques. It focuses on researching and developing various performance products, such as, high-performance racing car's connecting rod, crankshaft, piston, suspension and air spring.

Meanwhile, as Australian EMTRON's general agency, maXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. MaXpeedingrods has millions of audience and enjoys relatively high popularity in the global tuning car market.

Its products cover 60% of the mainstream vehicle performance tuning categories. Currently, maXpeedingrods has cumulatively researched and developed over 4,000 high-performance car parts and obtained many technical patents. Lots of research results have been converted into volume production and delivered to global tuning car enthusiasts.

Established in 2006, maXpeedingrods has been engaged in the research of over world racing products and culture. It has strong capability of independent research & development, industry-leading capacity of quality control and perfect logistics and after-sales service system. MaXpeedingrods always follow the development concept that "Success derives from devotion and happiness comes from sharing" to make contributes to domestic and overseas car tuning enthusiasts and the global racing culture by excellent products and service.

MaXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. We established cooperations with EMtron, Motec, LINK, Cartek, HiM, etc.

MaXpeedingrods owns its warehouses and branch offices in Hongkong, United States, Australia, United Kingdom and Germany. Toll IPEC or Au PosteParcel.

This also applies to orders cancelled during transit. There is no problem to return products in terms of unopened, complete, unused. Otherwise, we have the right to refuse the return.

This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Steering & Suspension\Shocks, Struts & Assemblies". The seller is "maxpeedingrodsgb" and is located in this country: GB. This item can be shipped to United Kingdom.

• shipping time to UK notice: 2-4 b.

  from UK

• Adjustable height: Yes, lowering 1\
• Applicable Regions: UK EU
• Brand: MaXpeedingrods
• Brand Type: Aftermarket Branded
• Bundle Listing: Yes
• Custom Bundle: No
• Damper: 24 levels rebound damping adjustable
• Features: 100% Accuracy of Fit, Adjustable, Easy to Replace
• Fit for: For SUZUKI Swift G10 1985-2001
• Front Spring rate: 8kg/mm (448 lbs/in)
• Front top mount: Pillow ball top mounts
• Important Notice: Package Included: Just like the picture, Professional installation required
• include: 2 Stainless Steel Wrenches
• Items Included: Coil Spring, Shock, Strut
• Manufacturer Part Number: WB3USE
• Manufacturer Warranty: 2 Years
• Material: Aluminium, Steel
• Modified Item: No
• Non-Domestic Product: No
• Note: Instruction Included
• Notice: NOT Ship to UK zip codes with BT letters and Canary of Spain, NOT Ship to UK zip codes with BT letters also any other islands, It's aftermarket replcement part
• Placement on Vehicle: Front, Left, Rear, Right
• Quantity: one set (2 pieces front + 2 pieces rear)
• Rear Spring rate: 5kg/mm (280 lbs/in)​
• Reference OE/OEM Number: G10
• Shock Absorber System: Double Pipe
• Spring Preload: 7-10 mm
• Type: Hydraulic
• Warranty Period: 2 Years