Coilover Suspension Kit for Toyota Corolla E90 E100 E110 Height Adjustable

  

BFCO coil-overs are designed as entry-level for street use. It features full-length height adjustable and adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, and improved performance for your daily use vehicle.

Top mount: pillow ball front and rear. Spring rate Front: 8 kg/mm (448 lbs/in). Spring rate Rear: 6 kg/mm (336 lbs/in). Adjustable height: lowering 1-3 inch.

Complete coil-over assembly kit for front and rear. A pair of wrenches for height adjustment.

Self-design structure and new manufacturing system to give more customers good coil-overs without breaking the bank. Full-length height adjustable---lower your car 1-3 inches (depending on vehicle models) to get a performance ride 3. Independent Ride Height and Spring Pre-load Adjustments 4. Twin-Tube System for Comfortable Ride on Streets 5.

Coated finish to avoid rust 6. Heavy Duty Steel Lower Mounts 7. Simple install, easy to adjust. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.

Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. Impact wrench is prohibited during the installation, it will loosen or damage the product. Examine the clearance between tires and suspension.

The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles 5.

We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime. Other items you might also like. Every message will be replied within 12 hours on 7x24 hours. 7x24 hours, always here for you.