Anti Roll Bar Kits (Eibach). Evo MK5 Wheel Lock Sets. Slim Head Bolt and Nut Sets. ST XTA Coilover Full kit Height Adjustable 18220832. Due to the global health situation, all ST coilover kits are currently made to order.The current lead time is 6-8 weeks from the date of order. Thank you for your understanding.
BMW 3er / 3-series (E90, E91, E93); (390L, 392C, 3L, 3K, 3C) saloon 04/05-01/12. BMW 3er / 3-series (E92); (392C, 3C) Coup.Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower!
NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory. KW Engineering: Exclusive for ST suspension.
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt.
Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions. Latest damping technology for maximum longevity. Reduced system friction for effective damping adjustment. Individual lowering within the tested adjustment range. Front and rear axle (when possible) with thread adjustment.
Galvanized coilover struts with additional coating for an optimized corrosion protection. Complete solution with adjustable spring plate, race spring system and bumpers with dust protection.Aluminium adjustable uniball top mounts (when possible). Scaled camber adjustment (optionally also caster). For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster! ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable top mountings allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup. Problems with any goods should be reported at the earliest opportunity. The reason for return along with an invoice number must be included in the parcel. All goods shall remain the property of TDC Automotive Limited until paid for in full. If there are delays with your order we will let you know within 24hrs.